News

O.D.:0.23''to 48''(5.8-1219mm)
W.T.:0.04''to 2''(1.0-50.8mm)
NPS 1/8''-48'' Schedule:5/5S,10/10S,20/20S,40/40S,80/80S,120/120S,160/160S according to ANSI B36.19/36.10
Stainless Steel Pipe Surface finish:Annealed,Polished

stainless steel elbow , tee , reducer passed by SGS inspection agency and the products were qualified and are now shipped abroad.

This customer is from Thailand, the second time to purchase the 8“ clamped butterfly valve with stainless steel actuator the feedback she received after receiving the goods, the quality is very good,thank you for your trust!

sanitary pipe fitting , 90 elbow , recuer , we sell this goods to USA ,The goods have been completed, waiting for inspection by the inspectors, and will be loaded into the carton after passing the inspection.

with the power supply is both convenient and economical, the establishment of a series of gas source station costs;

According to the engineering control requirement, the control function of the electric ball valve is carried out by the electric device.

As the requirements of industrial automation have always improved, on the one hand, the application of electric valves more and more, on the other hand, the control requirements of electric valves are more and more high, more and more complex.

Sanitary valves are generally used in pharmaceutical, food and other industries, for highly hygienic products.The sealing materials of the main sanitary valves are nitrile rubber, rubber polyurethane rubber, fluorine rubber, silicone rubber, acrylic rubber, butyl rubber, ethylene propylene rubber, polytetrafluoroethylene and so on.

Sanitary grade valves are used to compare hygiene grade requirements what is the difference between sanitary grade valves and industrial valves.?

Preparation before installation.
(1) the front and rear lines of the ball valve are ready. The front and rear pipes should be coaxial and the two flange cover should be parallel. The pipe should be able to bear the weight of the ball valve, otherwise the pipe must be properly supported.

Stainless steel ball valve working principle is to rotate the spool to make the valve open or blocked, the ball valve body can be integral, can also be combined.?The following is to introduce you to the stainless steel ball valve related knowledge.?

Ball valve and plug valve are the same type of valve, only its closure is a sphere, the sphere rotates around the centerline of the valve body to open and close.
The ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Ball valve is a new type of valve which has been widely used in recent years.